Thursday, December 1, 2011

Lexmark E260d -- Cover Removal

Proceed as follows:

1) Cartridge

2) Tray 1

3) Left Side Cover
- One M3x6mm bright washerhead screw at front by Tray 1 cavity.
- One M3x6mm bright washerhead screw at rear underside.
- Two claws at underside.
- Tip out the bottom and lift to remove.

4) Right Side Cover
- One M3x6mm bright washerhead screw at front by Tray 1 cavity.
- One M3x6mm bright washerhead screw at centre underside.
- One claw at rear underside.
- One claw at front just above the screw location.
- Tip out the bottom and lift to remove.

5) Back Door
- Open door and tug forcefully to pop it off its hinge pins.

6) Back Cover
- Two M4x8mm bright washerhead threading screws.
- One claw high up at either side.
- Tip away the top and lift the cover off two hook points at the bottom.

7) Top Cover
- Four M3x6mm bright washerhead screws, two at either side.
- Lift the cover off.

# # #


# # #

No comments:

Post a Comment