HP LaserJet 2300 -- Fuser Access

Proceed as follows:

1) Cartridge

2) Tray 2

3) Interface Connections Cover

4) Right Side Cover
- Under the cartridge door, there's a rectangular latch button. Push that down far enough and the cover can be slid forward about 5/16" to free it.

5) Rear Cover/Door
- Open the rear door part way. There's a pivoting guide rib array inside that can be unhooked to permit the door to drop open all the way.
- Two M4x10mm pan head threading screws.
- Two claws just inside the Tray 2 cavity.

6) Duplex Infeed Guide
- Two M4x14mm YZD pan head threading screws w/captive washers.
- Two small claws, left and right sides.

7) Fuser
- Three cable connections.
- One M4x10mm pan head threading screw.
- One M3x6mm pan head screw w/captive star washer.

# # #

FEEDBACK

# # #