HP LaserJet 2200 -- Tray 2 Pickup Roller & Separation Pad

Part Numbers

Pickup Roller: RB2-6304

Separation Pad: RB2-6349

- - -

Pickup Roller Replacement

1) Cartridge

2) Tray 2

3) Set the printer on its rear.

4) Left Side Bearing
- Unlatch its arm and swing the arm ninety degrees towards you.
- Remove the bearing.

5) Right Side Bearing
- Unlatch its arm and swing the arm ninety degrees towards you.
- Slide the bearing rightward until it's stopped.
- Swing the arm fully up toward the printer and slide the bearing fully to the right.

6) Pickup Roller w/Slip Rollers
- Tip out the right side end of the roller to remove it.
- TRANSFER the slip rollers to the new pickup roller. Missing slip rollers will render Tray 2 inoperative. Replacement rollers are P/N RB2-2892.

- - -

Separation Pad Replacement

1) From underneath, free two claws accessible through rectangular openings.

2) Free two claws at the front face of the separation pad. Lift the pad off its steel bracket.

3) Transfer the spring to the new separation pad. A replacement spring is P/N RS6-2021.

# # #

FEEDBACK

# # #