"917 Service Transfer Roll" is unlikely to be caused by anything other than the high voltage power supply (HVPS). There's a remote possibility that it could be caused by wiring/cabling, or even an engine controller or system PCA, but the odds are that it's the HVPS that's at fault.
The T64X series has been especially prone to give intermittent 917 errors. The P/N for a T64X HVPS is 40X4275.
This post gives the procedure for getting at the part to replace it. (It refers specifically to the T63X, but the T64X is virtually the same.)
# # #
Hey,
ReplyDeleteI really understand the error code that you are facing as I myself have faced this issue, this issue is caused by the wired which mainly resets the printer, after switching it on you will come across another error called lexmark 900 firmware error,
you just have to switch off the printer wait for sometime to get the memory resetted and then switch it back on to solve the issue.
This will certainly solved the whole complex issue that you have.