Lexmark X215 'Door Open' Message

The cover open switch is a lever-operated microswitch at the right front corner of the power supply PCA. A black plasic lever on the chassis' right side actuates it when the front door is closed.


If you're getting false 'door open' messages after having removed and reinstalled the electronics pan, it's probably because you got the switch's lever over top of the black plastic lever instead of underneath it as you were putting the electronics pan in place.


Fortunately, there's no need to take the electronics pan back out. Just remove the rear and the right side covers. The black plastic lever will be accessible. Take out the lever's screw, correct the lever's position and reassemble.

# # #